products

EPX50 - Overlay

EPX50-Overlay

EPX50-Overlay is a co-polymer epoxy urethane, solvent free, moisture-insensitive, 100% solids, low-modulus, two- component bonding agent. Meets ASTM-C- 881, Type III, Grade 2, Classes B & C. Also meets USDA specifications for use in food processing areas. Excellent for use as a binder for concrete skid- resistant overlays on bridges, elevated slabs and PCCP.
EP50--

EP50-Overlay

EP50-Overlay is a solvent-free, moisture- insensitive, 100% solids, low-modulus, two- component bonding agent. Meets ASTM-C- 881, Type III, Grade 2, Classes B & C. Also meets USDA specifications for use in food processing areas. Excellent for use as a binder for concrete skid- resistant overlays on bridges, elevated slabs and PCCP.

EP75-Seal

EP75-Seal is a highly penetrating, two component epoxy healer/sealer which when applied to cracked concrete, structurally seals the cracks against moisture and chloride ion intrusion, prolonging the life of the concrete. Its rapid cure time allows traffic to re-open in less than six hours
EP100 -

EP100-Seal

EP100-Seal is a highly penetrating, two component epoxy healer/sealer which when applied to cracked concrete, structurally seals the cracks against moisture and chloride ion intrusion, prolonging the life of the concrete. Its rapid cure time allows traffic to re-open in less than six hours.

EP - Patch

EP-Patch

EP-Patch is a three-component, high performance, 100% solids, multi purpose, non-shrink epoxy patching mortar. It is characterized by high early strength, low modulus, excellent workability and excellent bond strength. The system combines a high quality epoxy resin and curing agent with an engineered blend of graded aggregate.
EP - GEL FAST

EP-Gel Fast

EP-GEL Fast is two component, moisture-insensitive, 100% solids, high modulus epoxy gel adhesive that meets ASTM C-881 and AASHTO M-235 and it is listed by the ICC (formerly ICBO).
EP-MV

EP-MV

EP-MV is a 100% solids, two component, high modulus, medium viscosity, moisture tolerant structural epoxy adhesive that meets the requirements of ASTM C-881 and AASHTO M-235.
EP-SLV

EP-SLV

EP-SLV is a 100% solids, high modulus, moisture tolerant, very low viscosity epoxy adhesive for gravity feed or pressure injection of cracks in concrete. The EP-SLV meets the requirements of ASTM C-881 and AASHTO M-235.
EP15-Grout

EP15-Grout

EP15-Grout is a three-component, 100% solids, high performance, epoxy machine grout. It is characterized by high early strength, low dust, high bearing area, negligible shrinkage and creep, and excellent flowability.
EP15 - GroutXP

EP15-Grout XP

EP15-Grout XP.
EP20 - Chock (Gray)

EP20-Chock (Gray)

EP20-Chock is a two-component, 100% solids, high performance epoxy machine chock. It is characterized by high early and ultimate
strength, high bearing area, negligible shrinkage and creep, fast cure and excellent flowability. It can also use as anchor adhesive.
pag

Pile Anchor Grout

Pile Anchor Grout is a two component, 100% solids, ultra-high strength, pourable epoxy anchoring grout designed to anchor reinforcing steel and tension connectors in concrete piles and withstand high dynamic wind, water and seismic loads.

 

 

AWA Gel

AWA-GEL is ideal for anchoring bolts, dowels, threaded rod, pins and reinforcing steel in concrete. It is also ideal for vertical and horizontal structural bonding and patching. AWA-GEL may also be used to seal cracks and set injection ports prior to injection grouting. AWA-GEL can be used in cooler and freezer applications or anywhere low temperature installations are required.                    Estimating Guide

EP-ClearSeal

EP-ClearSeal is a two component, moisture insensitive, self-priming, impermeable, high gloss epoxy sealer that exhibits excellent bond strength. EP-ClearSeal uses a cycloaliphatic amine curing system for color retention and chemical resistance. EP-ClearSeal can be used for sealing interior and exterior concrete floors and for locking in aggregate on the E-Chem EP-Overlay system.
20150318_104653_resized

EP-Flex

EP-Flex is a 100% solids, two component, moisture tolerant joint filler and crack repair material.
C-Clean

C-Clean 100

C-CLEAN100 is a heavy duty stripper and degreaser that is used for general cleaning and degreasing of concrete surfaces, tools and equipment.

XD-Cure

E-chem xd-cure is a clear, odorless, water-based concrete curing compound that is formulated to ensure proper concrete strength development, help prevent shrinkage cracks, and leave a bondable surface for further coatings, treatments or flooring materials.
20160623_114407

HFP (High Friction Polymer)

High Friction Polymer (HFP) is designed for increased bond strength to asphalt surfaces, formulated with higher tensile elongation to allow for non-linear expansion and contraction coupled with superior retention of High Friction Surface Treatment (HFST) aggregates and is faster setting to allow for rapid return to traffic.

News & Events

5th April 2009

Integer mauris. Cras iaculis viverra dolorqw. Nulla suscipit. Proin eu sapien ac sem fermentum sollicitudin.

6th April 2009

Integer mauris. Cras iaculis viverra dolorqw. Nulla suscipit. Proin eu sapien ac sem fermentum sollicitudin.

7th April 2009

Integer mauris. Cras iaculis viverra dolorqw. Nulla suscipit. Proin eu sapien ac sem fermentum sollicitudin.

+ more news

Quick contact

The point of using Lorem Ipsum is that it has a more-or-less normal distribution of letters, as opposed to using ‘Content here, content here’, making it look like readable English.

Tel: +123456789

Fax: +123456789

Email: company@domainname.com

Comments are closed.