Epoxy Sealers

Urethane Seal

EP75-SEAL Urethane Sealant

EP75-SEAL is a highly penetrating, low-viscosity, two-component epoxy urethane sealer/healer offering longer life cycles than traditional epoxy polymer sealers. EP75-SEAL is designed by E-Chem to prolong the life of concrete by sealing cracks against moisture and chloride ion intrusion, with a rapid cure time that allows traffic to re-open quickly. It is also excellent for a low-viscosity prime coat prior to the placement of EPC-OVERLAY. Specific applications include bridge decks, parking decks, concrete floors, roadways, airport runways/taxiways, columns & beams in splash zones, and general consolidation of porous & dusting surfaces. EP75-SEAL is VOC compliant (<250 g/L).

our epoxy resin sealants used on concrete

EP100-SEAL


EP100-SEAL is a highly penetrating, 100% solids, two-component epoxy healer/sealer. EP100-SEAL is designed to prolong the life of concrete by sealing cracks against moisture and chloride ion intrusion, with a rapid cure time that allows traffic to re-open quickly. Specific applications include bridge decks, parking decks, concrete floors, roadways, airport runways/taxiways, columns & beams in splash zones, consolidation of porous & dusting surfaces, and primer or pre-treatment for subsequent epoxy or urethane deck coatings. Meets ASTM C881 (Type III. Grade 1. Class B & C.) and is VOC compliant (0 g/L).

EP100 Epoxy Sealer

EP100-SEAL HM Epoxy Sealant / Healer

EP100-SEAL HM is a high-modulus formulation of our EP100-SEAL epoxy healer/sealer product, making it an excellent option where minimal movement is desired to facilitate effective stress transfer, such as anchoring and doweling applications or structural crack repairs. Meets ASTM C881 (Type I, II, IV, V. Grade 1. Class C.) and is VOC compliant (0 g/L). Visit E-Chem to explore our wide range of epoxy products for your next project!

EP100 Seal

EP100-SEAL LM Epoxy Sealant / Healer

EP100-SEAL LM is a low-modulus formulation of our EP100-SEAL epoxy healer/sealer product, making it an excellent option where greater degrees of movement are required, such as bridge deck overlay applications where the material performs better if it is able to move along with the deck instead of cracking. Meets ASTM C881 (Type III. Grade 1. Class B & C.) and is VOC compliant (0 g/L).

Epoxy Sealer

EP-CLEARSEAL Clear Epoxy Sealant

EP-CLEARSEAL is a two-component, moisture-insensitive, self-priming, impermeable, high-gloss epoxy sealer that exhibits excellent bond strength. EP-CLEARSEAL uses a cycloaliphatic amine curing system for color retention and chemical resistance making it ideal for sealing interior and exterior concrete floors and epoxy surfaces. By effectively penetrating and bridging moving cracks, EP-CLEARSEAL creates an impermeable seal on hairline cracks. It is also ideal to use as a top dressing for epoxy grout and chock installations or for locking in aggregate on the E-Chem EP-OVERLAY system. EP-CLEARSEAL is VOC compliant (0 g/L) and USDA Approved as an incidental food contact material.