EPX50 Bridge Deck Overlay | Project Profile
PROJECT: 1-40 PORT OF ENTRY
LOCATION: GALLUP, NEW MEXICO
PRODUCT: EP100 SEAL & EPX-50 OVERLAY
This project was time critical on I-40. The installation needed to be completed in a single daytime shift. E-Chem provided a 2:1 spray pump to
apply the EP100 sealer in tandem with a 1:1 epoxy overlay pump for the EPX50. The sealer and overlay was installed in a single pass
allowing the contractor to complete the sealer application and two lifts of overlay in a 10 hour shift. The single shift requirement was
mandated due to hazards of having a lane closure overnight at the POE exit just past this installation.
- 100% SOLIDS
- Low Odor
- WORKER FRIENDLY
- EASY 1:1 RATIO
- LOW MODULUS
- RAPID TURNAROUND
- MOISTURE INSENSITIVE
- 100% Solids
- Low Modulus
- Moisture Insensitive
- Low Viscosity
- A new 3/8” wearing surface was provided in a single 10 hour shift.
- Increased project profitability due to solutions oriented approach.
- Reduced worker exposure to hazardous traffic conditions.
- Spot on mixing and application of multi ratio products in tandem application.
2944 William St. SE Albuquerque, NM 87102 | P: 505.217.2121 F: 505.217.3721 | www.e-chem.net